j. Install a new oil seal (30) into the crankcase seal
t. Attach the cylinder retainer to oil reservoir (1)
recess.
with screws (10). Install safety wire to the piston
retainer and cylinder retainer attaching screws.
k. Install the crankshaft assembly into the
crankcase until bearing (29) is firmly seated.
u. Place gasket (3) onto the oil reservoir mounting
flange.
l.
Press a new oil seal (22) into endbell (19).
v. Install oil reservoir (1) onto the crankcase while
m. Place gasket (21) onto the crankcase mounting
guiding the oil pump piston into the oil pump cylinder.
flange.
Attach the oil reservoir to the crankcase with sems
screws (2).
n. Carefully slide the endbell (19) and oil seal over
the crankshaft and attach to crankcase with six nuts
w. Install pipe nipple (5), reservoir tee (6), and
(20). Tighten the nuts with equal torque.
sight plug (7).
o. Install rod socket (18) over the ball retainer (17),
x. Close drain cock (4).
with the cupped side outward.
y. Install the first stage piston (paragraph 2-46),
p. Place socket (18) and ball retainer (17) into the
second stage piston (paragraph 2-50) and third stage
master connecting rod, with the cupped side toward the
piston (paragraph 2-54).
outside of the rod.
z.
Install the fan assembly (paragraph 2-38).
q. Place ball (16) in piston (15) and slide piston
retainer (13) onto piston with the retainer threads toward
aa. Install the intercooler assembly (paragraph 2-42).
the piston ball.
r. Attach the piston to the master connecting rod
ab. Install the aftercooler assembly (paragraph 2-34).
with the piston retainer. Install sufficient shims (14) to
ensure that the piston moves freely with no end play.
ac. Fill the oil reservoir with lubricating oil FSN
s. Attach pump cylinder (11) to cylinder retainer (9)
9150-753-4667. Install dip stick plug (8) .
with pin (12).
2-14
