TM 5-4310-349-14
e. Federal Supply Code for Manufacturer
(3) Recoverability Code.
Recoverability
(FSCM). The FSCM is a 5-digit numeric code listed in
codes are assigned to support items to indicate the
disposition action on unserviceable items.
The
SB 708-42 which is used to identify the manufacturer,
recoverability code is entered in the fifth position of the
distributor, or Government agency, etc.
Uniform SMR Code format as follows:
f.
Description. Indicates the Federal item name
and, if required, a minimum description to identify the
Code
Definition
item. Items that are included in kits and sets are listed
below the name of the kit or set, with the quantity of
Z
Nonreparable item.
When unserviceable,
each item in the kit or set indicated in the quantity
condemn and dispose at the level indicated in
incorporated in unit column. When the part to be used
position 3.
differs between serial numbers of the same model, the
effective serial numbers are shown as the last line of the
O
Reparable item.
When
uneconomically
description. In the Special Tools List, the initial basis of
reparable,
condemn
and
dispose
at
issue (BOI) appears as the last line in the entry for each
organizational level.
special tool, special TMDE, and other special support
equipment. When density of equipments supported
F
Reparable item.
When uneconomically
exceeds density spread indicated in the basis of issue,
reparable, condemn and dispose at the direct
the total authorization is increased accordingly.
support level.
g. Unit of Measure (U/M).
Indicates the
standard of the basic quantity of the listed item as used
H
Reparable item.
When uneconomically
in performing the actual maintenance function. This
reparable, condemn and dispose at the general
measure is expressed by a two-character alphabetical
support level.
abbreviation (e.g., ea, in., pr, etc.). When the unit of
measure differs from the unit of issue, the lowest unit of
D
Reparable item. When beyond lower level
issue that will satisfy the required units of measure will
repair capability, return to depot. Condemnation
be requisitioned.
and disposal not authorized below depot level.
h. Quantity Incorporated in Unit. Indicates the
quantity of the item used in the breakout shown on the
L
Reparable item. Repair, condemnation, and
illustration figure, which is prepared for a functional
disposal not authorized below depot/specialized
group, subfunctional group, or an assembly. A "V"
repair activity level.
appearing in this column in lieu of a quantity indicates
that no specific quantity is applicable (e.g., shims,
A
Item requires special handling or condemnation
spacers, etc.).
procedures because of specific reasons (i.e.,
precious metal content, high dollar value, critical
C-4. Special Information.
material or hazardous material).
Refer to
appropriate manuals/directives for specific
a. Usable on codes are shown in the description
instructions.
column. Uncoded items are applicable to all models.
Identification of the usable codes in this publication are:
c. National Stock Number.
Indicates the
Code
Used on
National stock number assigned to the item and which
BXC
Champion Model HR10-8M-1
will be used for requisitioning purposes.
CVW
Champion Model HR10-8M-4
d. Part Number. Indicates the primary number
CYE
C&H Model 20-277M
used by the manufacturer which controls the design and
characteristics of the item by means of its engineering
b. Some items are indented to show that they are
drawings, specifications standards, and inspection
a component or components of the items under which
requirements to identify an item or range of items.
they are indented.
c. Repair parts kits and gasket sets appear as the
NOTE
last entries in the repair parts listing for the figure in
When a stock numbered item is requisitioned,
which its parts are listed as repair parts.
the repair part received may have a different
part number than the part being replaced.
Change 2 C-3
