TM 5-4310-362-14
Troubleshooting (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 8. Check for bad motor control relay.
Replace relay.
Step 9.
Check for burned motor control contacts.
Replace contacts.
2.
LOW AIR PRESSURE
Step 1.
Check to see if compressor cuts out at low pressure.
Adjust pressure switch. (6-14)
Section II. MOTOR STARTER & BRACKET MAINTENANCE INSTRUCTIONS
6-4.
MAINTENANCE SUMMARY
This task covers:
a. Removal.
b. Disassembly.
c. Cleaning.
d. Inspection.
e. Repair.
f. Assembly.
g. Installation
INITIAL SETUP
Personnel Required
General Safety Instructions
1
Disconnect electrical power before beginning
maintenance procedure.
6-4
