TM 5-4310-362-14
COMPRESSOR DRIVE (cont)
LOCATION/ITEM
ACTION
REMARKS
5.
Motor mounting screws
Loosen
To allow belts to be mounted on pulley.
(6)
6.
Motor (7)
Slide in direction of arrow.
7.
2 belts (8)
Install
8.
Motor (7)
Adjust position for proper belt
tension.
CAUTION
Too little belt tension causes
belts to overheat and w ear
Belt tension is right when belts move
out prematurely. Too much
1/2 inch when pushed on half way be-
tension causes bearing wear
tween pulley and flywheel.
in motor and compressor.
9.
Mounting screws (6)
Tighten when proper belt ten-
sion is achieved.
10. Cover (8)
Install with four screws (9).
7-7/(7-8 blank)
