TM 5-4310-367-14
WHEEL ASSEMBLY continued
ACTION
REMARKS
LOCATION/lTEM
4-41. CLEANING, INSPECTION AND REPAIR.
WARNING
Drycleaning solvent, P-D-680,
used to clean parts is poten-
tially dangerous to personnel
and property. Avoid repeated
and prolonged skin contact
by wearing rubber or solvent
impermeable gloves when
handling the solvent or ma-
terial wet with drycleaning
solvent. Wash hands immedi-
ately after exposure with soap
and water and use a lanolin
based skin cream to prevent
skin drying. Do not use near
open flame or excessive heat,
Flash point of solvent is
100F (38C). Ensure that
ventilation adequate to re-
duce solvent vapor concen-
trations below acceptable
threshold limit values is
provided.
a. Wipe off excess grease.
1.
Bearing
b. Clean with drycleaning
solvent P-D-680.
c. Air dry.
d. Inspect for wear,
e. Replace if badly worn or
damaged.
4-50
