TM 5-4310-370-14
TM 5-4310-370-14/5-6
1.
Valve Chamber Caps (2)
5.
Valve Gaskets (2)
2.
Valve Chamber Cap Gaskets (2)
6.
Exhaust Valve
3.
Valve Retainers (2)
7.
Cylinder Head
4.
Intake Valve
FIGURE 5-6. HIGH PRESSURE HEAD ASSEMBLY
(2) Place low pressure head assemblies on bench and disassemble reed valve assemblies.
(a) Remove low pressure retainer (figure 5-7, item 8) from reed valve head (figure 5-7, item 3).
(b) Remove filter (figure 5-7, item 1) and filter silencer (figure 5-7, item 2) from reed valve head (figure
(c) Remove valve plate (figure 5-7, item 5) from bottom of reed valve head (figure 5-7, item 3).
(d) Remove reed valve (figure 5-7, item 7) from valve plate (figure 5-7, item 5) by turning rolling screw
(e) Remove valve plate gasket (figure 5-7, item 4).
5-18
