TM 5-4310-371-14
TABLE 3-1. OPERATOR/CREW TROUBLESHOOTING (Cont'd)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Tighten oil filler plug and oil drain cap.
Begin normal operation and check to see if leak persists.
If it does, refer malfunction to higher level of main-
tenance. (See Appendix B)
9. AIR LEAKAGE
WARNING
Disconnect compressor unit from main power supply before performing check(s)
or inspection, to avoid personal injury.
WARNING
Disconnect compressor unit from main power supply before servicing, replacing
or repairing parts of equipment, to avoid personal injury.
Step 1.
Check for and note location of leak.
If leak is present, refer malfunction to higher level of
maintenance. (See Appendix B)
10. RESTRICTED AIR FLOW THROUGH AIR INLET FILTERS AND/OR PARTICLES IN INFLATOR GAGE HOSE OR
INFLATOR GAGE
WARNING
Disconnect compressor unit from main power supply before performing check(s)
or inspection, to avoid personal injury.
WARNING
Disconnect compressor unit from main power supply before servicing, replacing
or repairing parts of equipment, to avoid personal injury.
Step 1.
If compressor pump is running, but air receiver is receiving air
slowly, check air inlet filters for build-up of dirt.
Step 2.
If there is dirt or particles in inflator gage.
Refer malfunction to higher level of maintenance. (See Appendix B)
3-7
