TM 5-4310-372-14
AIR RECEIVER TANK AND AIR DISCHARGE SYSTEM - continued
4-30. DISASSEMBLY.
1.
2.
3.
4.
5.
6.
WARNING
Never attempt to service any of the air compressor
components until the engine is stopped and the air
r e c e i v e r t a n k i s r e l i e v e d o f a l l a i r p r e s s u r e .
CAUTION
Do not apply any pressure or torque on the body
of the pressure gauge while unscrewing it from
the receiver.
Use a properly sized wrench on the
flats provided next to the threaded connection.
Pressure Gauge
Unscrew from tank
Safety Relief Valve
Unscrew from tank.
Draincock
Unscrew from tank,.
Inflator Gauge
Remove from end of air
hose.
Air Hose
a.
b.
Ball Valve
a.
7.
Air Receiver Tank
b .
a .
b.
Remove, with swivel
fitting, from the ball
valve.
Separate (unscrew) swivel
fitting from hose.
Unscrew from pipe nipple
attached to the air re-
ceiver tank.
2
3
12,13
14
Unscrew pipe nipple from
tank.
For inspection:
Remove pipe plugs.
For replacement:
15
1
5,6,7
Refer to paragraphs 4-14,
4-18, 4-22, 4-34 and 5-6
for removal of the com-
pressor drive, fuel sys-
tem components as well as
the gasoline engine and
compressor.
4-50
