TM 5-4310-373-14
REMARKS
ACTION
LOCATION/lTEM
5-10. MOTOR, ELECTRIC/INSPECTION/CLEANlNG continued
WARNING
Clean motor components with
compressed air no greater than
30 psi.
WARNING
Eye protective wear must be
worn when cleaning with com-
pressed air or scraping paint.
a. Scrape loose paint from
1. Stator and frame
frame with wire brush.
assembly
b. Blow out stator and wind-
ings with compressed air.
c. Prime and paint frame
where necessary.
Wipe off with clean rag.
2. Rotor assembly
Clean vent holes with com-
3. End balls
pressed air.
5-25/(5-26 blank)
