TM 5-4310-375-14
1-8.
Glossary. The glossary of terms used in this manual are listed below.
Cut-in . . . . . . . . . . . . . . . . Motor starts, compressor starts compressing air.
Cut-out . . . . . . . . . . . . . . . Motor stops, compressor stops compressing air.
Equipment . . . . . . . . . . . . Compressor Unit, Reciprocating, Electric Motor Driven, Tank Mounted.
Front . . . . . . . . . . . . . . . . Side of the unit facing the motor control box.
Left end . . . . . . . . . . . . . . Left-hand end of the unit facing the front.
Load . . . . . . . . . . . . . . . . See "Cut-in" above.
Manufacturer . . . . . . . . . . . Davey Compressor Company, Cincinnati, OH 45242 (FSCM 16004).
Rear . . . . . . . . . . . . . . . . . Side of unit facing the belt guard.
Right end . . . . . . . . . . . . . Right-hand end of the unit facing the motor control box.
Unit . . . . . . . . . . . . . . . . . See "Equipment" above.
Unload . . . . . . . . . . . . . . . See "Cut-out" above.
Section II. EQUIPMENT DESCRIPTION
1-9.
Equipment characteristics, capabilities, and features.
a. Equipment purpose. The purpose of the unit is to provide a source of compressed air for normal operations
conducted at filling stations and vehicle maintenance shops.
b. Characteristics.
(1) Electric motor, belt drive
(2) Reciprocating air compressor, two-stage
(3) Air receiver (tank) mounted
c.
Capabilities and features.
(1) 15 CFM (0.425 m3/min) of compressed air
(2) 175 PSI (12.3 kgs/cm2) rated; 200 PSI (14.1 kgs/cm2) maximum
(3) 80 Gallon (302.8 liters) receiver tank capacity
(4) Two (2) forklift tine openings for lifting
(5) Adjustable pressure switch
(6) Magnetically operated starter
(7) Manual reset of overload protective device
1-10. Location and description of major components. Refer to figure 2-1 for location and description of major
components.
1-11. Differences between models. This manual covers only the Davey Compressor Company Model RI22RAAB,
Part Number 84950, compressor unit. No known differences exist for model covered herein.
1-2
