TM 5-4310-375-14
APPENDIX G
TORQUE LIMITS
Section I. INTRODUCTION
G-1. Scope. This appendix lists standard torque values in both foot-pounds (ft-lbs) and equal metric values in kilogram-
meters (kg-m) for the standard and metric thread sizes used on the air compressor unit.
G-2. Special torque limits. Special torque limits are found in the narrative portion of the maintenance procedures for
applicable components.
Section II. TORQUE LIMITS
Ft-lbs
Kg-m
Ft-lbs
Thread Size
Thread Size
Kg-m
8.0
1.11
M6
0.06
0.4
4-40NC
20.8
2.88
0.21
3/8-16NC
1.5
8-32NC
39.0
5.39
M10
0.27
10-24NC
1.9
45.8
6.34
1/2-13NC
0.37
10-32NF
2.7
0.92
6.7
1/4-20NC
G-1/(G-2 Blank)
