TM 5-4310-377-13
3-19. OIL FILLER CAP, PLUG, AND SIGHT GAGE.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Replace
e. Installation
SET-UP:
Tools:
3/8 inch wrench
Pliers, common
Materials:
Sight Gage Seal (1 each)
Lubricating Oil (Appendix E, item 1)
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use
solvent only in a well- ventilated area. Avoid prolonged breathing of fumes. Keep
solvent away from flames. Do not use in excessive amounts. Avoid skin contact.
Personnel: 1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bleed off (para. 2-2).
Crankcase drained (para. 3-2).
GO TO NEXT PAGE
3-47
