TM 5-4310-377-13
Section XI. PREPARATION FOR STORAGE OR SHIPMENT
3-31. GENERAL.
To prepare the air compressor for storage or shipment, proceed as follows:
a. Turn off electrical power and disconnect the power lines to the air compressor.
b. Remove the oil drain plug and drain the oil into a suitable container. Reinstall the drain plug.
c. Open the drain cock and allow the air and accumulated moisture to drai n off. Close the drain cock.
d. Remove the flexible hose.
e. Set the air compressor on a skid and bolt the air compressor to the skid.
3-81/3-82 Blank
