TM 5-4310-378-14
(2) Inspect for loose mounting bolts or damage to equipment.
b.
Replacement.
(1) Removal
( a ) Remove four bolts (l), eight copper washers (2), first stage cylinder (3), and
g a s k e t (4). Discard gasket. Repeat for other first stage cylinder.
( b ) Remove four bolts (5), eight copper washers (6), second stage cylinder (7), and
g a s k e t (8). Discard gasket.
( c ) Remove two bolts (9), first stage connecting rod and piston assembly (10), and
c o n n e c t i n g rod cap (11). Repeat for other first stage piston.
NOTE
.
Mark connecting rod caps so they may be installed on
t h e same rod, the same way.
( d ) Remove two bolts (12), second stage connecting rod and piston assembly (13),
a n d connecting rod cap (14).
4-10
