Lines and Fittings (Cont). - TM-5-4310-379-14

Figure 3-20. Fuel Filter Supply Line, Replace.

Figure 3-21. Fuel Manifold Supply Line, Replace.

TM-5-4310-379-14 Compressor Air Reciprocating Electric Motor Driven Reciprocating Electric Motor Driven 15 CFM at 175 PSI Manual
Page Navigation
87

TM 5-4310-379-14 3-24. Lines and Fittings (Cont). (4) Fuel manifold supply line. (figure 3-21) (a) Loosen fitting nut (1). (b) Loosen fitting nut (2) and remove line (3). (c) Loosen fitting nut (4) and remove fuel return line (5) (d) Remove elbows (6), (7), and (8). NOTE Leave 1 1/2 threads exposed when applying teflon tape. Wrap teflon tape in the direction that will not unwrap as fitting is tightened. Failure to wrap teflon tape properly or having it extend past the end of the fitting may cause a blockage in the fuel system. (e) Apply teflon tape to elbows (6), (7), and (8) and install. (f) Install fuel return line (5) and tighten fitting nut (4). (g) Install line (3) and tighten fitting nuts (1) and (2). 3-62

Privacy Statement
Press Release
Contact