TM 4310-379-143-39. Rocker Cover (Cont).b.Repair. (figure 3-53)NOTERocker cover removed for repair. See para. a. above.WARNINGDry cleaning solvent PD-680 used to clean parts is potentially dangerous to personneland property. Avoid repeated and prolonged skin contact. Do not use near open flameor excessive heat. Flash point of solvent is 100-138°F (38-60C).(1) Clean all items, except gasket, with dry cleaning solvent, and dry thoroughly.(2) Inspect rocker cover (1), hold down screws (2) and oil fill cap (3).(3) Replace a cracked or otherwise damaged rocker cover (1).(4) Remove spring pin (4) and remove hold down screw (2) and gasket (5).(5) Inspect hold down screw (2) and replace if threads are stripped or hold down screw (2) is bent or otherwisedamaged.(6) Inspect gasket (5) and replace if cracked or otherwise damaged.(7) Install hold down screw (2) and gasket (5) and secure with spring pin(4).(8) Repeat steps 4 through 7 for remaining hold down screw.(9) Inspect oil filler cap gasket (6) and replace if cracked or otherwise damaged.3-124
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
