TM 5-4310-379-14
3-42. Compressor Air Cleaner Intake (Cont).
b.
Repair. (figure 3-58)
NOTE
There are two air cleaner intakes, repair of each is the same.
(1)
Remove wing nut (1) and remove cap (2) and air filter (3).
(2)
Remove nut cap (4) from elbow (5).
(3)
Clean elbow (5), nut cap (4), air filter (3), and cap (2) using nonionic detergent cleaner and rinse with clean
distilled water.
(4)
Inspect elbow (5) and plastic nut cap (4) for cracks.
(5)
Inspect air filter (3) and cap (2) for dents, cracks, worn or other signs of damage.
(6)
Replace any component that is worn, cracked or otherwise damaged.
(7)
Install nut cap (4) on elbow (5).
(8) Install air filter (3) and cap (2) on nut cap (4) and secure with wing nut (1).
3-134
