TM 5-4310-379-14
3-46. Controls and Indicators (Cont).
(6)
Stop control. (figure 3-68)
(a)
Loosen screw (1).
(b)
Loosen two screws (2) and remove stop control (3) from stop control lever (4) and block (5).
(c)
Remove nut (6) and lockwasher (7) and remove stop control (3).
(d)
Install stop control (3) and secure with lockwasher (7) and nut (6).
(e)
Install stop control (3) in block (5) and stop control lever (4).
(f)
Tighten screw (1).
3-152
