Fixed 30 Gallon Air Receiver Fittings and Valves.

TM-5-4310-379-14 Compressor Air Reciprocating Electric Motor Driven Reciprocating Electric Motor Driven 15 CFM at 175 PSI Manual
Page Navigation
332

TM 5-4310-379-14 4-36. Fixed 30 Gallon Air Receiver Fittings and Valves. This task covers: Replace INITIAL SETUP Tools Materials Parts (Cont) General Mechanic's Tool Kit (NSN 5180-00-177-7033) Elbow Plug Materials/Parts Elbow Tee Tape (Item 24, Appendix D) Safety Valve Bands, Rubber (Item 5, Appendix D) Adapter Bags, Plastic (Item 4, Appendix D) Drain Valve Reducer Elbow Valve Teflon Tape (Item 25, Appendix D) Nipple, Hex Replace. (1) Reducer. (figure 4-53) WARNING Cleanliness is imperative in maintaining and handling diving air system components. All tools and parts must be kept free of oil, grease, rust, or other contamination in accordance with accepted army diving cleaning procedures. Foreign substances within an assembly could result in equipment failure and possible injury or death to personnel. Ensure that all air lines and components removed or openings into the air system that provides breathing air are covered with a plastic bag and secured with a rubber band or taped shut. Small components should be stored In a plastic bag and sealed. Failure to do so will cause air system to become contaminated and could result In Injury or death to the diver. (a) Remove reducer (1). WARNING Leave 1 1/2 threads exposed on fitting when applying teflon tape. This will ensure that no teflon tape will hang down inside the air system. Teflon tape should be wrapped in such a manner that when the fitting is tightened the tape will not loosen. Failure to wrap teflon tape correctly may result in contamination or blockage of the air system and subsequent possible injury or death to the diver. (b) Apply teflon tape to threads on reducer (1). (c) Install reducer (1). 4-126

Privacy Statement
Press Release
Contact