TM 5-4310-379-14
5-39. Frame
This task covers:
a.
Replace
b.
Repair
INITIAL SETUP:
Tools
Equipment Condition (Cont)
General Mechanic's Tool Kit
(NSN
5180-00-177-7033)
Battery removed (para. 3-35).
Fuel tank removed (para. 3-47).
Equipment Condition
Portable air receiver removed (para. 3-41).
Air receiver removed (para. 3-41).
Engine assembly removed (para. 3-13).
Portable air filtration system removed (para. 4-31).
Air compressor assembly removed (para. 4-35).
a.
Replace. (figure 5-56)
(1)
Remove two adjusting screws (1).
(2)
Remove two screws (2) and nuts (3) and remove placard (4).
(3)
Repeat step 2 for three remaining placards.
(4)
Remove two screws (5) and nuts (6).
(5)
Remove two screws (7) and lockwashers (8) and remove air receiver frame (9).
(6)
Install air receiver frame (9) and secure with two screws (7) and lockwashers (8).
(7)
Install two screws (5) and nuts (6).
(8)
Install placard (4) and secure with two screws (2) and nuts (3).
(9)
Repeat step 5 for remaining three placards.
(10)
Install two adjusting screws (1).
5-164
