TM 5-4310-379-14
3-17. Shell Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Fan guards removed (para. 3-16).
Materials/Parts
Shell Assembly
Engine Coolant (Item 2, Appendix D)
Replace. (figure 3-9)
(1) Open radiator cap (1) and pet cock (2) and drain coolant into suitable container and close pet cock (2).
(2) Loosen clamp (3) and remove upper outlet hose (4) from radiator (5).
(3) Loosen clamp (6) and remove lower inlet hose (7).
(4) Remove four screws (8) and nuts (9) and remove shell assembly (10).
(5) Remove four screws (11), washers (12), and lockwashers (13) and remove baffle (14).
(6) Remove four screws (15), washers (16), and lockwashers (17) and remove shroud (18) and radiator (5).
(7) Install radiator (5) and shroud (18) and secure with four screws (15), washers (16) and lockwashers (17).
Torque screws to 15-19 Ib-ft (20-26 Nm).
(8)
Install baffle (14) and secure with four screws (11), washers (12), and lockwashers (13). Torque screws to
15-19 Ib-ft (20-26 Nm).
(9) Install shell assembly (10) and secure with four screws (8) and nuts (9). Torque screws to 30-35 Ib-ft (41-
47 Nm).
(10) Install lower inlet hose (7) and tighten clamp (6).
(11) Install upper outlet hose (4) and tighten clamp (3).
(12) Fill radiator with coolant and install radiator cap (1).
FOLLOW-ON MAINTENANCE:
Install fan guards (para. 3-16).
3-38