TM 5-4310-380-13
Section XI. PREPARATION FOR STORAGE OR SHIPMENT
3-30. GENERAL.
To prepare the air compressor for storage or shipment, proceed as follows:
a. Turn off electrical power and disconnect the power lines to the air compressor.
b. Remove the oil drain plug and drain the oil into a suitable container. Reinstall the drain plug.
c. Open the drain cock and allow the air and accumulated moisture to drain off. Close the drain cock.
d. Remove the flexible hose.
e. Set the air compressor on a skid and bolt the air compressor to the skid.
3-71/(3-72 Blank)
