TM 5-4310-380-13
APPENDIX F
TORQUE TABLE
Section I. INTRODUCTION
F-1. SCOPE.
This appendix lists standard torque values in both foot-pounds (ft-lbs) and equal metric values in kilogram-meters (kg-m)
for the standard and metric thread sizes used on the air compressor unit.
F-2. SPECIAL TORQUE LIMITS.
Special torque limits are found in the narrative portion of the maintenance procedures for applicable components.
NOTE
Torque limits bolt size.
Section II. TORQUE LIMITS
THREAD SIZE
HD SIZE
FT-LBS
KG-M
4-40NC
0.4
0.06
8-32NC
1.5
0.21
10-24NC
1.9
0.27
10-32NF
2.7
0.37
M5
8 mm
5.0
0.63
1/4-20NC
7/16 inch
6.7
0.92
M8
13 mm
18.0
2.44
3/8-16NC
9/16 inch
20.8
2.88
M10
17 mm
31.0
4.21
1/2-13NC
3/4 inch
45.8
6.34
M12
19 mm
60.0
8.14
F-1/(F-2 Blank)
