TM 5-4310-384-13
i.
Install pressure switch (8). Refer to paragraph 3-21.
j.
Install compressor unit (7). Refer to paragraph 3-27.
k.
Install tubing assemblies (6). Refer to paragraphs 3-31 and 3-43.
I.
Install electric motor (5). Refer to paragraph 3-33.
m. Adjust belt tension (paragraph 3-24) and pulley alignment (paragraph 3-25).
n.
Install motor starter and enclosure (4). Refer to paragraphs 3-18 and 3-19.
o.
Install belt guard (3). Refer to paragraph 3-23.
p.
Close drain cock (2).
CAUTION
Before operating compressor, be sure all components and fittings are secure and tight. Also, check that
wiring is correct. Check that tools and objects are clear of unit.
q.
Connect main power.
r.
Turn power switch (1) on and run compressor. Inspect entire unit, check for air leaks and perform operational
check.
3-61
