TM 5-4310-384-13
DISASSEMBLY.
WARNING
Disconnect main power and turn compressor unit off before performing maintenance procedures.
NOTE
Do not disassemble heater block assembly unless replacing insulation or cartridge heaters.
a.
Unscrew pressure gage (1) from body of regulator.
b.
Remove adjusting knob assembly (2).
c.
Remove cover assembly (3) from body.
d.
Lift out regulating spring (4).
e.
Remove diaphragm assembly (5).
f.
Remove valve spring (6) and valve stem (7) from body (8).
g.
Unscrew baffle (9) from adapter (10) and remove filter element (11).
3-67
