TM 5-4310-386-14
4-22.
Compressor Air Intake Filter Assembly
This task covers:
a.
Service
b.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Materials/Parts
Air Intake Filter Assembly
a.
Service.
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use only with
protective equipment (goggles/shields, gloves, etc. ). Failure to do this may result in injury.
Service air filter by blowing compressed air from inside out.
b.
Replace. (figure 4-25)
(1)
Loosen screw (1) on clamp (2) and remove hose (3).
(2)
Remove wing nut (4) and remove housing (5).
(3)
Remove air filter (6).
(4)
Remove nut (7) and bolt (8) and remove base (9).
(5)
Install base (9) and secure with bolt (8) and nut (7).
(6)
Install air filter (6) and housing (5) and secure with wing nut (4).
(7)
Install hose (3) on housing (5) and tighten screw (1) on clamp (2).
4-62
