TM 5-4310-386-14
4-24. Compressor Flywheel/Fanwheel Assembly (Cont).
b.
Repair. (figure 4-28)
(1)
Compressor flywheel/fanwheel assembly removed (para. a. above).
(2)
Remove 36 bolts (1) and washers (2), and remove six wing supports (3) and 18 fan wings (4).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 138°F (60°C).
(3)
Clean all components with dry cleaning solvent and dry thoroughly.
(4)
Inspect all components and replace if cracks, bent, worn, or otherwise damaged.
(5)
Install six wing supports (3) and 18 fan wings (4) on pulley (5) and secure with 36 bolts (1) and washers
(2).
(6)
Install compressor flywheel/fanwheel assembly (para. a. above).
4-68
