TM 5-4310-386-14
4-27.
Top Strap Assembly
This task covers:
a.
Replace
INITIAL SETUP
Tools
Personnel Required
General Mechanic's Tool Kit
Two
(NSN 5180-00-177-7033)
Equipment Condition
Materials/Parts
Compressor unit shut down (para. 2-13).
Top Strap Assembly
Replace. (figure 4-32)
NOTE
There are two top strap assemblies. Replacement of each strap assembly is the same.
(1)
Support the fuel tank white removing strap assembly.
(2)
Remove two screws (1), lockwashers (2), and washers (3).
(3)
Remove bottom strap assembly (4).
(4)
Lower fuel tank (5) just enough to remove top strap assembly (6).
(5)
Remove top strap assembly (6).
(6)
Install top strap assembly (6), position fuel tank (5).
(7)
Install bottom strap assembly (4) and secure with two washers (3), lockwashers (2), and screws (1).
4-78
