TM 5-4310-386-14
4-31. Fuel Lines and Fittings.
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Materials/Parts
Fuel Hoses
Replace. (figure 4-38)
(1)
Remove two banjo bolts (1), four sealing rings (2) and remove hose (3).
(2)
Remove banjo bolt (4), two sealing ring (5) and fitting (6).
(3)
Remove fitting (6) from fitting (7).
(4)
Loosen screw (8) on clamp (9) and remove hose (10) from fitting (7).
(5)
Remove clamp (9) from hose (10).
(6)
Loosen screw (11) on clamp (12) and remove hose (10) from fitting (13).
(7)
Remove clamp (12) from hose (10).
(8)
Remove fitting (13) from fuel tank fitting (14) and remove fitting (14).
(9)
Remove bolt (15), washer (16), and fitting (17).
(10)
Loosen screw (18) on clamp (19) and remove hose (20) from injector fitting (17).
(11)
Remove clamp (19) from hose (20).
(12)
Loosen screw (21) on clamp (22) and remove hose (20) from fitting (23).
(13)
Remove clamp (22) from hose (20).
(14)
Remove fitting (23) from fuel tank fitting (24), and remove fuel tank fitting (24).
(15)
Install fuel tank fitting (24) and install fitting (23) on fuel tank fitting (24).
(16)
Install clamp (22) on hose (20).
4-98
