TM 5-4310-386-14
4-40. Engine V-Beltguard.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Materials/Parts
V-Beltguard
Replace. (figure 4-50)
(1) Remove four hex bolts (1) and washers (2).
(2) Remove five cap nuts (3), washers (4), and rubber grommets (5) and remove V-beltguard (6).
(3) Install V-beltguard (6) on stud (7) and secure with five rubber grommets (5), washers (4), and cap nuts (3).
(4) Install four washers (2) and hex bolts (1).
4-124
