TM 5-4310-386-14
4-49. Oil Filter Assembly (Cont).
b. Replace. (figure 4-67)
(1)
Place suitable container under oil filter drain and remove drain plug (1) and gasket (2).
(2)
Drain oil completely and replace drain plug (1) and gasket (2).
(3)
Remove screw (3), sealing ring (4), cover (5), gasket (6), and filter (7).
(4)
Ensure all gasket surfaces are clean and free of old gasket material.
(5)
Install filter (7) into cavity of engine (8).
(6)
Lightly lubricate gasket (6) with clean engine oil.
(7)
Install gasket (6), cover (5), sealing ring (4), and tighten screw (3). Torque screw to 25 - 26 lb-ft
(34 - 35 Nm).
(8)
Remove oil filler cap (9).
(9)
Fill crankcase with oil to the top mark on dipstick (10).
(10)
Install oil filler cap (9).
4-158
