TM 5-4310-386-14
5-8. Controls and Indicators (Cont).
(4) Oil pressure gage. (figure 5-6)
(a) Loosen fitting nut (1) and remove line (2) from oil pressure gage (3).
(b) Remove two nuts (4) and lockwashers (5) and remove two brackets (6).
(c) Remove oil pressure gage (3) from control panel (7).
(d) Install oil pressure gage (3) and two brackets (6) and secure with two lockwashers (5) and nuts (4).
(e) Install line (2) and tighten fitting nut (1).
5-20
