TM 5-4310-386-14
5-11.
Compressor Oil Pump and Supply Line.
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Compressor oil drain (para. 4-8f.).
Materials/Parts
Reference
Oil Pump
Refer to Appendix F for torque values.
Oil Pump Gasket
Oil Pump Supply Line
Cloth, Lint Free (Item 7, Appendix E)
Replace.
(figure 5-11)
(1)
Loosen fitting nut (1) and remove line (2) from oil pump (3).
(2)
Loosen fitting nut (4) and remove line (2) from regulator valve (5).
(3)
Remove three allen screws (6) and washers (7).
(4)
Remove oil pump (3) and gasket (8), and discard gasket.
(5)
Ensure that all gasket material is removed from crankcase and oil pump. Wipe area with lint free cloth.
(6)
Install oil pump (3) and gasket (8), and secure with three alien screws (6) and washers (7).
(7)
Install line (2) on regulator valve (5) and tighten fitting nut (4).
(8)
Install line (2) on oil pump (3) and tighten fitting nut (1).
5-50
