TM 5-4310-386-14
(14)
Install gasket (7), hex head stud (6), and secure with acorn nut (5).
(15)
Install gasket (4) and connector (3) on valve head (2).
WARNING
Leave 1 1/2 threads exposed on fitting when applying Teflon tape. This will ensure that no
Teflon tape will hang down inside the air system. Teflon tape should be wrapped in such a
manner that when the fitting is tightened the tape will not loosen. Failure to wrap Teflon tape
correctly may result in contamination or blockage of the air system and subsequent possible
injury or death to the diver.
(16)
Apply Teflon tape to threads on elbow (1) and install elbow (1) on valve head (2).
(17)
Install 1st stage valve head assembly (para. a. above).
5-95
