TM 5-4310-386-14
5-45. Engine Front Cover (Cont).
b.
Repair. (figure 5-69)
(1)
Remove front cover (para. a. above).
(2)
Remove shaft seal (1) from front cover (2).
(3)
Remove screw plug (3) and sealing ring (4).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 138oF (60oC).
(4)
Clean all items with dry cleaning solvent and dry thoroughly.
(5)
Inspect all items and replace any item if crack or otherwise damaged.
(6)
Install sealing ring (4) and screw plug (3).
(7)
Install shaft seal (1) on front cover (2).
(8)
Install front cover (para. a. above).
FOLLOW-ON MAINTENANCE
Install V-belts (para. 4-41).
5-192
