APPENDIX C COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS

Section IV. REMARKS - TM-5-4310-386-14_502

Section II. COMPONENTS OF END ITEMS - TM-5-4310-386-14_504

TM-5-4310-386-14 Compressor Reciprocating Air: Electric Motor Driven & CFM 175 PSI C & H Model 20-918 Manual
Page Navigation
489

TM 5-4310-386-14 APPENDIX C COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS Section I. INTRODUCTION C-1. Scope. This appendix lists components of end item and basic issue items for the 20 CFM Compressor Unit to help you inventory items required for safe and efficient operation. C-2. General. The Components of End Item and Basic Issue Items Lists are divided into the following sections. a. Section II. Components of End Item. This listing is for informational purposes only, and is not authority to requisition replacements. The items are part of the end item, but are removed and separately packaged for transportation or shipment. As part of the end item, these items must be with the end item whenever it is issued or transferred between properly accounts. Illustrations are furnished to assist you in identifying the items. b. Section III. Basic Issue Items. These are the minimum essential items required to place the 20 CFM Compressor Unit in operation. The illustrations will assist you with hard-to-identify items. This manual is your authority to request/requisition replacement Bll, based on TOE/MTOE authorization of the end item. C-3. Explanation of Columns . The following provides an explanation of columns found in the tabular listings: a. Column (1). Illustration Number (Illus Number). This column indicates the number of the illustration in which the item is shown. b. Column (2). National Stock Number. Indicates the National Stock Number assigned to the item and will be used for requisitioning purposes. c. Column (3). Description. Indicates the Federal item name, and, if required, a minimum description to identify and locate the item. The last line for each item indicates the FSCM (in parentheses) followed by the part number. d. Column (4). Unit of Measure (U/M). Indicates the measure used in performing the actual operational/maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea, in., pr). e. Column (5). Quantity Required (QTY RQR. Indicates the quantity of the item authorized to be used with/on the equipment. C-1

Privacy Statement
Press Release
Contact