TM5-4310-386-24P
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
Section I INTRODUCTION
1.
SCOPE This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support and
general support maintenance of the Air Compressor, 20 CFM, 3,200 PSI It authorizes the requisitioning, Issue, and
disposition of spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR)
codes
NOTE
SMR codes in this RPSTL are shown only on parts that will be stocked for
maintenance of the end Item. Other Items may be ordered using the CAGEC
and Part Number. Maintenance and recoverability authorization for parts without
SMR codes can be Identified by the next higher assembly or the Maintenance
Allocation Chart (MAC) found in TM5-4310-386-14
2.
GENERAL In addition to this section, Introduction, this Repair Parts and Special Tools List is divided
into the following sections
a. Section II Repair Parts List A list of spares and repair parts authorized by this RPSTL for use In the
performance of maintenance This list also includes parts which must be removed for replacement of the authorized parts
lists are composed of functional groups In ascending alphanumeric sequence, with the parts In each group listed In
ascending FIGURE and Item number sequence. Bulk materials are listed In item name sequence. Items are shown In the
associated illustration(s)/FIGURE(s)
b. Section III. Special Tools List A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
column) for the performance of maintenance.
c
Section IV Cross - Reference Index A list, in National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing, followed by a list In alphanumeric sequence of all part numbers
appearing In the listings. National stock numbers and part numbers are cross referenced to each illustration FIGURE and
item number appearance The FIGURE and item number index lists FIGURE and item
numbers In alphanumeric sequence and cross references NSN, CAGEC and part number.
3.
EXPLANATION OF COLUMNS (SECTIONS II AND III).
a.
ITEM NO (Column (1)) Indicates the number used to Identify items called out In the illustration
b.
SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-postion code
containing supply/requisitioning Information, maintenance category authorization criteria, and disposition Instruction, as
shown In the following breakout
Source
Code
Maintenance
Code
Recoverability
Code
XX
1st two positions
XX
X
How you get an
item.
3d position
4th position
Who can install,
Who can do
replace or use
complete repair*
the item.
(see note) on
the item
Who determines
disposition
action on an
unserviceable item.
1
