TM 5-4310-387-14
4-17. Inlet Filter and Adapter Assembly (Cont).
b. Replace. (figure 4-6)
(1 ) Remove cover (1), spring (2), preformed packing (3), element (4) and preformed packing (5) from filter housing
(6). Discard preformed packings (3) and (5).
(2) Loosen air inlet hose clamp (7) and remove air inlet hose (8) from housing (6).
(3) Loosen clamp (9) and remove housing (6).
(4) Remove preformed packing (10) and discard.
(5) Remove adapter (11) and fiber washer (12).
(6) Install new fiber washer (12) and adapter (11).
(7) Install new preformed packing (10).
(8) Install housing (6) and tighten clamp (9).
(9) Install air inlet hose (8) and tighten clamp (7).
(10) Install new preformed packing (5), element (4), new preformed packing (3), spring (2), and cover (1).
4-20
