TM 5-4310-387-14
4-22. Crankcase Breather Assembly (Cont).
b. Replace. (figure 4-14)
(1) Loosen two connector nuts (1) and remove line (2).
(2) Unsnap two clips (3) and remove cover (4) and preformed packing (5). Discard preformed packing (5). i_
(3) Ensure area between base (6) and crankcase (7) is clean and all dirt and debris is removed.
(4) Remove base (6) and gasket (8).
(5) Inspect line (2) and replace if cracked or punctured.
(6) Install new base (6) and gasket (8).
(7) Install new preformed packing (5) and cover (4) and secure with two clips (3).
(8) Install line (2) and tighten two connector nuts (1).
4-34
