TM-5-4310-389-14
3-19 COOLING SYSTEM (COMPRESSOR).
DESCRIPTION
This task covers: Inspect. Service
INITIAL SETUP
Tools:
Equipment conditions:
General Mechanic Tool Kit
1. Secure equipment (paragraph 2-11).
Materials/parts:
Non-ionic detergent, item 13 Appendix E
Brush, item 8 Appendix E
Lint-free cloth, item 9 Appendix E
Face shield, item 26 Appendix E
INSPECT
SERVICE
WARNING
Eye protection/face shield must be worn when using compressed air for cleaning. Never use
compressed air over 35 psi line pressure for cleaning. Clear immediate area of personnel.
a.
Detach belt guard by removing six 7/16-inch hex bolts.
b.
Brush a non-ionic soap solution on compressor cylinder head fins, cooler fins, and fan (figure 3-13). Rinse well
with clear water.
c.
Blow dry using compressed air at 35 psi, if necessary.
d.
Replace belt guard using six hex bolts.
3-30
