TM 5-4310-393-24P
(2)
The physical security classification of the item is indicated by the parenthetical entry, e.g., Phy Sec Cl
Confidential, Phy Sec C1 (S) -Secret, Phy Sec Cl (T) Top Secret.
(3)
Items that are included in kits and sets are listed below the name of the kit or set.
(4)
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
(5)
Part numbers for bulk materials are referenced in this column in the line item entry for the item to be
manufactured/Fabricated.
(6)
When the item is not used with all serial numbers of the same model, the effective serial number are shown
on the last line(s) of the description (before UOC).
(7)
The usable on code, when applicable (see paragraph 5, Special Information).
(8)
In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and other special support equipment. When density of equipment supported exceeds density
spread indicated in the basis of issue, the total authorization is increased proportionately.
(9)
The statement "END OF FIGURE" appears just below the repair part, indicates that the item is a repair part
of the next higher assembly.
f.
QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V"
appearing in this column in lieu of a quantity indicates that the quantity is variable and may vary from application to
application.
4.
EXPLANATION OF COLUMNS (SECTION 4).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1)
STOCK NUMBER column. This column lists the NSN by National item identification number (NIIN)
sequence. The NIIN consists of the last nine digits of the NSN, i.e. For the NSN 5305-02-574-1467 the NIIN is 02-574-
1467 When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN should
be used when ordering items by stock number.
(2)
FIG. column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in Section 2 and Section 3.
(3)
ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b.
PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in
order A through Z, followed by the numbers O through ( and each following letter or digit in like order.
(1)
CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5 digit numeric code used to
identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
5
