TM 5-4310-451-14
4-92. OIL SEPARATOR OIL FILL TUBE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions
•
system pressure relieved.
•
Thermal housing removed (see paragraph 4-89).
Tools/Test Equipment:
•
General mechanic's tool kit
•
Common no. 1 shop set
a.
REMOVAL
1.
Remove cap (1) and preformed packing (2) frorr
adapter (3). Discard preformed packing.
2.
Remove adapter (3) and tee (4) from tube (5).
3.
Remove tube (5) from oil separator (6).
lb. INSTALLATION I
1. Apply sealing compound to threads of tube (5,
and install tube on oil separator (6).
2. Apply sealing compound to threads of tee (4)
anc adapter (3) and install tee and adapter on
tube (5).
3. Install new preformed packing (2) and cap (1) or
adapter (3).
FOLLOW-ON TASKS:
•
Install thermal housing (see paragraph 4-89).
Materials/Parts:
•
Sealing compound (Item 14, Appendix E)
•
One preformed packing
4-216
