TM 5-4310-451-14
5-44. OIL PICKUP SCREEN AND TUBE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Oil pan removed (see paragraph 4-32).
Three gaskets
Tools/Test Equipment:
Eight lockwashers
General mechanics tool kit
Field automotive shop set
a. REMOVAL
1.
Remove two screws (19) and lockwashers (18). Discard lockwashers.
2.
Remove two screws (13), lockwashers (12), oil pickup tube (20), and gasket (17). Discard lockwashers and
gasket.
3.
Remove two nuts (8), lockwashers (7), bolts (1), washers (2), and bracket assemblies (16) from oil pickup tube
(20). Discard lockwashers.
4.
Remove screen (3), gasket (4), screen cover (5), and gasket (6) from oil pickup tube (20). Discard gaskets.
5.
Remove two nuts (9), lockwashers (10), screws (14), washers (15), and four brackets (11). Discard
lockwashers.
b. INSTALLATION
1.
Aline four brackets (11) and install two screws (14),washers (15), new lockwashers (10), and nuts (9) fingertight.
2.
Aline new gasket (6), screen cover (5), new gasket (4), and screen (3) on oil pickup tube (20) and install two
washers (2) and bolts (1).
3.
Aline two bracket assemblies (16) on two bolts (1) and install two new lockwashers (7) and nuts (8).
4.
Aline one end of oil pickup tube (20) and two bracket assemblies (16) with holes in engine block and install two
screws (19), screws (13), new lockwashers (18), and new lockwashers (12).
5.
Tighten two screws (14) and nuts (9).
5-154