TM 5-4310-451-14
5-89. FENDER-TO-FRAME PANELS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Right side fender removed (right side fender-to-frame
•
Six locknuts
panels replacement only)(see paragraph 5-93).
•
Left side fender removed (left side fender-to-frame
Personnel Required: Two
panels replacement only)(see paragraph 5-92).
Tools/Test Equipment:
•
General mechanic's tool kit
a. REMOVAL
NOTE
Right and left side fender-to-frame panels are removed same way. This procedure covers left side
panels.
1. Remove three screws (4) and front fender-to-frame panel (3) from frame (1).
2. Remove six screws (7) and two middle fender-to-frame panels (8) from frame (1).
3. Remove six screws (6) and locknuts (2) and remove two fender panels (5). Discard locknuts.
4. Remove three screws (9) and rear fender-to-frame panel (10) from frame (1).
5-352
