TM 5-4310-452-14
4-67. TRAILER BRAKESHOES AND WHEEL CYLINDER REPLACEMENT (Con't).
5.
Install parking brake cable assembly (20) in backing plate (3) and connect to lever (18).
NOTE
Perform step 6 if removing front brakeshoes only.
6.
Install brake adjuster socket (13), spring (12), and 2 brakeshoes (7), with longer brakeshoe to the rear, on backing
plate (3).
7.
Install strut (11) and spring (10) in slot of brakeshoes (7).
8.
Position 4 spring seats (14) and 2 springs (15) on brakeshoes (7). Install 2 pins (19) in springs (15) from back side of
brakeshoes.
9.
Install guide plate (8) and 2 springs (9) on backing plate (3).
10. Install trailer brakedrums (see paragraph 4-66).
11. Bleed brakes if necessary.
c.
ADJUSTMENT
1.
Remove adjuster cover (22) from backing plate (3).
2.
Turn brake adjuster socket (13) until brakeshoes expand against drum and heavy drag is felt when wheel is spun.
TA505507
4-131
