TM 5-4310-452-14
Section XII. FRAME AND TOWING ASSEMBLY MAINTENANCE
Paragraph
Page
Number
Title
Number
4-74
Drawbar Replacement .................................................................................................... . 4-147
4-75
Spare Tire Mount Replacement .................................................................................. ..... 4-148
4-76
Mudflap Replacement ............................................... ...................................................... 4-149
4-77
Leveling Jack Replacement ...................................... ............................................. ......... 4-150
4-74. DRAWBAR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Five self-locking nuts
Tools/Test Equipment:
• General mechanic's tool kit
• Torque wrench
• Common number 2, less power
a.
REMOVAL
1.
Remove 5 capscrews (4), washers (1), and self-
locking nuts (2) from drawbar (3) and frame.
Discard self-locking nuts.
2.
Remove drawbar (3) from frame.
b.
INSTALLATION
1.
Position drawbar (3) in place on frame and install 5
capscrews (4), washers (1), and new self-locking
nuts (2).
2.
Tighten capscrews (4) and self-locking nuts (2) to
180-200 lb. -ft. (244-271 N•m).
4-147
