TM 5-4310-452-14
4-103. HOSE REEL ASSEMBLY SUPPORT BRACKET AND COUPLING REPLACEMENT.
This Task Covers
a. Removal
b. Installation
Initial Setup
Equipment Conditions:
Materials/Parts:
Engine off.
Four self-locking bolts
System air pressure relieved.
Four self-locking nuts
Hose reels removed (see paragraph 4-102).
Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
1.
Disconnect air discharge hose assembly (3) from adapter (2). Remove adapter from hose reel support bracket (4).
2.
Remove 2 pipe caps (9), 4 flat washers (8), and 2 coupling halves (7) from frame.
3.
Remove coupling half (15), 2 nipples (14), and angle valve (1) from hose reel support bracket (4).
4.
Remove 2 coupling halves (13), ball valves (12), and nipples (11) from hose reel support bracket (4).
4-213