TM 55-1905-223-24-8
2-24.
Repair Bearing Carrier. (FIGURE 2-16)
This task covers:
a. Removal,
b. Repair,
c. Replacement.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
Bearing carrier group removed
Torque wrench kit,
P/N 3377216
Materials/Parts
Gear rotor set P/N 160003
Bearing carrier (assembly)
P/N 110812-003
Bearing Carrier P/N 110812
REMOVAL
a.
Remove six 1/4-inch hex bolts (8) from oil pump housing (1) separate from bearing carrier (2).
b.
Remove two 3/8-inch counterbore screws (6) and washers (5) from oil pickup tube (4), remove gasket (3).
REPAIR
a.
Remove the gear rotor set (7) from the shaft on bearing carrier (2).
b.
Install gear rotor set (7) on bearing carrier (2) shaft.
REPLACEMENT
a.
Attach oil pickup tube (4), oil inlet bracket gasket (3) to bearin carrier (2) with two 3/8-inch counterbore
g
screws (6) and washers (5). Torque to 25 ft-lbs.
b.
Attach oil pump housing (1) with six 1/4 inch-hex bolts (8). Torque to 15 ft-lbs.
Change 1 2-49
