TM 55-1905-223-24-8
3-22. Repair Connecting Rod Assembly (High Pressure). (FIGURE 3-11)
This task covers: a. Disassembly, b. Repair, c. Assembly.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
Connecting rod assembly (high pressure)
removed (para. 2-22).
Materials/Parts
Cleaning solvent, Item 4, Appendix C
Connecting rod assembly P/N 110804
Wiping rags, Item 3, Appendix C
Lubricating oil, Item 5, Appendix C
DISASSEMBLY
a. Remove retaining rings (2, 5) and slide piston pin (4) out of pisto (3).
n
b. Pull piston (3) from connecting rod (6).
REPAIR
a. Clean all parts with solvent and clean rags.
b. Inspect for rust, corrosion, or broken parts. Replace connecting rod assembly if necessary.
ASSEMBLY
a. Pre-lube all parts with clean oil before assembling.
b. Place piston (3) on connecting rod (6), and ensure that bushing (1) is in place.
c.
Slide piston pin (4) into piston and connecting rod.
d. Insert and seat retaining rings (2 and 5).
3-31
