TM 9-4310-394-13
(4)
Mount regulator lever (4) to regulator bracket (3) using the lever locking knob (9). Secure with self-locking
nut (10).
(5)
Attach return spring (7) to the governor lever (6) and to regulator lever (4).
(6)
Attach regulator spring (5) to the second hole from the left on the governor lever (6) and connect spring to
second hole from the left on regulator lever (4).
(7)
Mount regulator bracket assembly (3) with mounting bolts (2 and 1).
(8)
Lubricate all moving parts with lubricating oil.
e.
Adjustment.
(1)
Check that engine RPM is 3,800 max unloaded or 3,600 max loaded.
(2)
Loosen nut (15) and adjust bolt (14) until engine operates at proper RPM.
(3)
When engine RPM is correct, tighten nut t (15) to hold adjusting bolt (14) into position and install
new wire (13) to seal adjustment.
Figure 5-4. Regulator Bracket Assembly Repair and Replacement.
5-11
